|
|
Piston Pump
- PAF, PVP, PV series
- Displacement : Range from 6 3 to
500 CC/Rev
- Speed : 600—3000 RPM
- Max Pressure : 350 Bar
- Pressure compensation, max volume stop, through shaft capabilities and varies of control options available
|
|
|
Variable Displacement Pressure
Compensated Vane Pump
- PVR series
- Displacement : Range from 11 to 150 CC/Rev
- Speed: 800 to 3600 RPM
- Max. pressure: 140 Bar
- Pressure compensation, max volume stop, tandem pump and varies control options available
|
|
|
High Torque Radial Piston Hydraulic
Motor M, L, GM and P Series
- Displacement up to 4700 CC/Rev
- Horse power up to 375 HP
- Nominal continuous pressure 210 Bar (Peak pressure 420 Bar)
- Two speed, free wheeling and reduction gear box (with brakes) available on request
|
|
|
Turolla: Gear Pump and Gear Motor
- TFP, SNP2 and SNP3 series for single pump
- PRR, PRN, PRB and PON series for tandem pump
- Displacement range 1.2 to 90 CC/Rev
- Max working pressure up to 250 Bar
- TFM, SEM2, SNM2 series gear motor
- Displacement range from 1.2 to 25 CC/Rev
- High pressure capability up to 250 Bar
- Operating speed : 500 to 5000 RPM
|
|
|
2000 / 4000 / 6000 / 10,000 LSHT
Motor |
|
|
2000 / 10,000 Series LSH Two Speed
Motor |
|
|
Series 2 to 450 Power Steering
Control Unit |
|
|
Eaton Hydrostatic Transmission Pump
and Motor Model: 33 through 76
- 6000PSI pressure rating
- Speeds to 4500 RPM
- Tandem unit varies of control option available
|
|
|
HOF Vane Pump
Group I
- Displacement range : 3 to 22 CC/Rev
- Max pressure : 175 Bar
- Speed : 600 to 3000 RPM
Group II
- Displacement range : 17 to 44 CC/Rev
- Max pressure : 210 Bar
- Speed : 800 to 3000 RPM
|
|
|
Hansa TMP – Hydraulic Hand Pump
- Displacement 29cm per stroke
- Pressure : up to 320 Bar
- Option for attach to 4 litres oil tank, other size / accesories available on request
|
|
|
Roller Bearing Gear, Pumps & Motor
- Robust cast iron construction suitable for demanding applications like mobile construction, earthmoving and agriculture.
- Energy efficient, with working pressures up to 2500 psi (170 bar).
|
|
|
Rotary Flow Divider Intensifier
- This equipment divides a single oil flow input into several output streams, in direct proportion to the gear widths used.
- The Rotary Flow divider also acts as an intensifier, transfering energy from total oil flow to that portion being used.
|
|
|
Multiple Section Pump
- Available in up to five pump sections, providing five separate flows from a single output drive.
- The individual flows can be tailored to suit most requirements over a range of speeds.
|
|
|
Phase II Bush Bearing Pumps & Motors
- A unique journal bush lubrication system lubricates bushes with clean, cool oil from the inlet side.
- Working pressure to 3500 psi (240 Bar).
- This equipment is particularly suitable for high speed, high pressure applications. Note that 10 micron filtration is essential.
|
|
|
Fixed Displacement Gear Pumps and
Motors
- Commercial’s extensive range with displacements from 10.6 to 249.9 and working pressures to 3500 psi, can handle the most difficult and heavy work loads, efficiently and effectively.
- A wide selection of standard shaft and mounting configurations is available to suit most drive requirements.
|