 |
MP Filtri Return line filter, Tank top filter (MPF series)
- Maximum working preassure 3 bar
- Flowrate : 100-800 L/MIN
- Filtering material : inorganic microfibre or resin treated paper
- Mounting : semi immersed
|
 |
Oil level / Temp indicator
- Built in thermometer
- Size : 3″, 5″ & 10″
- Working pressure : 2 bar at 80°C
- Working temperature from -30°C to 100°C
|
 |
Medium – high pressure filter (FHP series)
- Maximum working pressure : 420 bar
- Flow rate from 20 to 420 L/MIN
- Indicator : visual, electrical or progressive electronic
- Mounting : pressure line
- port option : BSP-NPT : SAE flange
|
 |
Filter breather (TA) series
- Flow rate : up to 1200 L/MIN
- Filtering material : resin-treated paper
- Tank fitting : straight flange, BSP thread angle flange
|
 |
Suction stainer
- Size : 1″ to 3″
- Flow rate : 7 to 105 GPM
|
 |
Spin on filter
Spin-On filters are used as process and safety filters to protect individual pumps, valves or the entire hydraulic circuit from contamination as per ISO 4406. Versions are available with operating pressures ranging from 174 to 508 psi. In-line Spin-On filters can be used for the following purposes :
- Suction filters
- On the return circuit, for mounting on the line or on the tank cover
- In-line for low and medium pressures
Spin-On filters are available in 4 configurations :
- Single cartridge in-line
- In-line with two parallel cartridges on the same axis
- In-line with two parallel cartridges mounted side by side
- With single cartridge flange for installation to the tank cover
All versions may be equipped with visual and/or electrical blockage indicators |
 |
MPT, MPH, MPF
- Tank mounted return filter, with oil flow external to internal filtering element.
- Working pressure from 8 to 10 bar (116 – 145 psi), flow rates up between 750 l/min to 3000 I/min
- threaded connections from 1/2” to 1 1/2”
|
 |
MPI
- Tank mounted return filter with oil flow internal to external filtering element. Working pressure 10 bar (145 psi), flow rates up to 2000 l/min (530 gpm)
|
 |
FRI
- Tank mounting semi-immersed filter. Flow rates to 1500 l/min. Working pressure 20 bar.
|
 |
RF2
- Semi-submerged return filter, flow rates up to 455 l/min (120 gpm), threaded connection up to 1 1/2” and flanged connections up to 1 1/2” SAE 3000 PSI.
|
 |
Clogging indicator + Differential indicator
- Clogging indicator + Differential indicator
|
 |
Donaldson FilterP550779 – LUBE FILTER, SPIN-ON FULL FLOW
Donaldson lube filters protect your engine by capturing wear metals, soot and other contaminants in your engine oil. Donaldson carries a complete line of diesel oil filters – in both standard life and Donaldson Blue™ for extended service intervals. Donaldson Blue lube filters with Synteq™ media deliver improved lubricant flow, improved cold start performance and a higher level of engine protection to prolong engine and equipment life. |
